Direct Pressure for Small Air Compressors
Advanced LED Cabinet Lighting
0.8 Cubic Foot, Constant Pressure ASME Coded Pressure Pot
3030 Savage Direct Pressure

3030 Savage Direct Pressure

The 3030 Savage comes equipped with a very large 700 cfm exhaust blower and separator reclaimer.  Included is the negative pressure 220 sq.ft. MERV tested cartridge filtration with hopper dust storage and semi-automatic vibrator cleaning cycle found on the Production Charger Model.

For smaller areas the optional blower silencer can be added to reduce the noise level to below OSHA standards.

This is Top of the Line machine design and not just another blasting cabinet.

Buy Now

Description

The 3030 Savage Direct Pressure Blasting Cabinet was designed to operate using smaller air compressors using 220-volt single-phase electrical power.  This is the electrical power found in home garages and commercial boulevard facilities that don’t have access to three phase electrical power to operate large air compressors.  The 3030 Savage has the correct abrasive flow controls for the smaller air volumes.

The 3030 Savage is also a constant pressure design that holds the pot pressure until the operator decide it’s time to fill the pot assembly.  This results in instant on-off control of the blasting cycle, fast pressure pot re-loading and use less compressed air.

Most abrasives, when using direct pressure, reach maximum impact velocity at a much lower pressure than siphon delivery.  Glass beads have a maximum impact velocity of 40 psi when using direct pressure.  Harder abrasive like aluminum oxide have a maximum impact velocity of 50 psi.  The machine can be shipped with 1/8” nozzle or 3/16” nozzle depending on how much compressed air you have.  The 1/8” nozzle uses 12 cfm at 50 psi and the 3/16” nozzle uses 23 cfm at 40 psi.  Choose the nozzle size right for your smaller air compressor or have the machine shipped with both sizes.

Included Features

  • 13” x 15” Safety View Window
  • Low Static Window Protector
  • Window Sweep to help keep the window clear
  • Advanced LED Cabinet Lighting
  • Air Inlet Filters
  • 8” Diameter Work Ports
  • Right Side Access Door
  • Lockable Door Handle
  • Operator Control Panel
  • Expanded Metal  Work Grates
  • Boron Carbide Nozzle
  • Blow-Off Gun
  • 220 Sq.Ft. Cartridge Dust Collector
  • Easy Clean Pneumatic Vibrator Cleaning Cycle
  • MERV Test Cartridge Filter
  • Dust Collector Service Access Door
  • Hopper Dust Storage
  • 700 CFM Blower optional  Silencer Available
  • Expanded Metal  Work Grates
  • Boron Carbide Nozzle
  • Blow-Off Gun
  • 220 Sq.Ft. Cartridge Dust Collector
  • 700 CFM Blower, Optional  Silencer Available
  • Easy Clean Pneumatic Vibrator Cleaning Cycle
  • MERV Tested Cartridge Filter
  • Dust Collector Service Access Door
  • Hopper Dust Storage

Buying Guide

If you’re not sure whether the 3030 Savage Direct Pressure is the best fit for your needs, check out our Buying Guide or give us a call - our goal is to help you buy the right machine the first time!

Specification

3030 Savage Machine Specifications

3030
Inside Cabinet                      30”x30”x30”H
Overall Cabinet                    35”Wx45”Dx84”H
Door                                       24” x 25”H
Air Usage                              12 to 23 CFM
Electrical                               120 Volt-60Hz
Dust Collector                      220 Sq.Ft. Cartridge
Shipping Weight                  650 Lbs.                  

Printed Literature Sheet

​​​​​​​​​​​​​​​​​Print
View Fullscreen