COBRA Stage I and II Siphon

Description

The Cobra’s all-negative pressure cabinet and dust collector are 100% welded 14-gauge steel including two (2) side access doors and hopper dust storage with MERV tested cartridge filtration technology.

This unit was designed for general repair shops, in-house maintenance, home shops and automotive repair shops when compressed air is limited to air compressors operating on 220 volt single phase power that is normally limited to 25 cfm maximum.

The advanced cartridge filter technology makes the Cobra machines best in their field without considering our larger Blasting Cabinet Lineup. The Cobra is available in two models, Stage I and Stage II allowing the user to choose between a 16 cfm gun with a 350 cfm blower and manually cleaned dust collector and the faster 22 cfm gun size with the 500 cfm blower assembly and semi-automatic vibrator dust collector cleaning cycle. Each machine has all the air controls and each machine has the gun size matched to the blower, separator reclaimer and dust collector filters size.

Included Features

13” x 24” ClearView™ Window
Low Static Window Protector Glass
Window Sweep
Advanced LED Lighting
8” Work Ports
All Air Controls
Blow-Off Gun
Abrasive Flow Control Mixing Valve
Tungsten Carbide Nozzle
Leg Leveling Pads

Right and Left Side Access Door
Tool-Less Window Replacement
Large Hopper Drain
Vertical Flow Control Mixing Valve Sump with Drain
Foot Operated Blast
Patented Separator Reclaimer

Negative Pressure Dust Collector, 100% Welded
90 sq.ft. MERV Tested Filter Cartridges
Manually Cleaned Cartridge Rapper (Stage I)
Vibrator Cleaned Cartridges (Stage II)
Large Dust Storage Hopper
Dust Collector Service Door
350 cfm Blower Stage I
500 cfm Blower Stage II
16 cfm Gun (Stage I)
22 cfm Gun (Stage II)
Tungsten Blasting Nozzle

Buying Guide

If you’re not sure whether the COBRA Stage I and II Siphon is the best fit for your needs, check out our Buying Guide or give us a call - our goal is to help you buy the right machine the first time!

Specification

Cobra Stage I & II Siphon Specifications

table cellspacing="1" cellpadding="2">

Inside Cabinet

42”W x 24”D x 26”H

Overall Cabinet

47”W x 37”D x 82”H

Door

20” x 21-3/4”H

Air Usage Stage I

16 CFM @ 80 PSI

Air Usage Stage II

22 CFM @ 80 PSI

Electrical

120 Volt-60Hz

Dust Collector

Cartridge 90 Sq.Ft.

Dust Collector Blower stg.I

350 CFM @ 1” S.P.

Dust Collector Blower stg. II

500 CFM @ 1” S.P.

Dust Collector

Dust Storage Hopper

Dust Collector

Service Access Door

Shipping Weight Stage 1

400 Lbs.

Shipping Weight Stage 2

425 Lbs.

With the Cobra Models you get to choose the way you want to operate the machine based on added features.

Stage I uses a smaller gun size with a manually cleaned dust collector rapper cleaning assembly.

Stage II uses a faster larger gun size, and fast effortless pneumatic vibrator cleaning cycle.

You choose the Stage best for your application.